Sign in

why does the windows installer need h61m-ge bios just to see my ssd?

Solvedasrockf6-drivernvmewindows-install17 replies · 428 views · started
Reply

Accepted solution

by SamiJump to the reply

if it still isnt visible, check the drive is in a slot that supports NVMe (not SATA-only M.2) and try another USB port for the installer stick.

  1. Vik
    @cobaltsmith

    ugh. okay, I feel dumb, but Im stuck at step one.

    Trying replacing the SSD on my freshly built PC. Windows setup shows no drives. I downloaded H61M-GE Bios from ASRock on another computer, but its an EXE, not something teh installer can use. How do I get teh right files out of it, and which folder should I point Load driver to? Id really like to finish this tonight. any ideas??

    rage

    0
  2. Sami
    @samiz746

    yeahhh many newer laptops ship with Intel VMD (Volume Management Device) enabled, which hides teh NVMe behind a controller that Windows setup has no inbox driver for. You need the F6 / RST VMD driver from teh PC maker's support page (often listed as "F6 driver" or "RST dirver for Windows setup"). hope that helps :)

    2 2 helpful
  3. Sami
    @samiz746

    lol same thing happened to me extract the pacakge, copy the folder with teh .inf, .sys and .cat files to the install USB, then in setup click Load driver > Browse and select that folder. The VMD controller entry should appear; install it and the drive shows up.

    lol

    10 1 helpful
  4. Sami A.
    @regextinker-1fh

    long time lurker first post lol spent 3 hours on winodws and im still not done any ideas??

    1 0 helpful
  6. Sana
    @cronsmith-1if

    👀

    4 0 helpful
  7. Sami A.
    @regextinker-1fh

    ehh everyone keeps saying this but nobody posts proof

    at this point my GPU cost more than my car lol

    0 2 helpful
  8. Sana
    @cronsmith-1if
    in reply to @regextinker-1fh

    oh ive been there lol if teh download is an EXE, many installers support extraction, e.g. running it with -extractdrivers <folder> or a similar switch documented on teh support page. Otherwise, 7-Zip can often open it directly. good luck man!

    2 6 helpful
  9. Diego Rahman
    @diego.rahman

    alternative: disable VMD in the BIOS (sometimes listed under storage or advanced settings). then Windows sees the NVMe with its inbox driver. Only do this for a clean install; on an existing install, switching storage mode makes Windows unbootable.

    0 1 helpful
  10. Sami A.
    @regextinker-1fh

    make sure the install media is recent. older media may lack drivers for newer controllers; teh Media Creation Tool makes current media. good luck man!

    0 10 helpful
  11. Sami
    @samiz746
    in reply to @regextinker-1fh Accepted solution

    if it still isnt visible, check the drive is in a slot that supports NVMe (not SATA-only M.2) and try another USB port for the installer stick.

    1 7 helpful
  12. Sami
    @samiz746

    bump. still happening with freshly for me worked for me anyway 🤷

    2 0 helpful
  13. Diego Rahman
    @diego.rahman

    spent 3 hours on windows and im still not done... pro tip: write down what u chnage. i didnt and had to redo windows from scratch im about to throw this thing out the window lol

    3 0 helpful
  14. Diego Rahman
    @diego.rahman

    been there man make a backup before u touch the cable, learned that teh hard way lmk how it goes

    6 0 helpful
  15. Sami
    @samiz746

    yeahhh try turning off the antivirus first, fixed it for me hope that helps :)

    4 0 helpful
  18. Vik
    @cobaltsmith
    in reply to @samiz746

    @samiz746 dude extracted the F6 driver, loaded it during setup, and the NVMe appeared immediately 🙏 Windows installed fine. Thank you sooo much! cant believe it was that simple lol

    6 1 helpful
Read next · Driver Help & Troubleshooting
rolled back hd audio driver package and still no sound. where else do i look? 🤔
Solved · 27 replies
Read

Reply to this topic

Sign in or create an account to reply.