intel vga driver update and now two monitors at different refresh rates flicker like a strobe light

flickergigabytegpumulti-monitor18 replies · 368 views · started
  1. long time lurker first post lol i work on two monitors at dfiferent refresh rates all day, and today was unbearable. flicker, flicker, flicker on the secodnary screen.

    gpu artifacts

    the Intel VGA Driver update went in last night. ive tried swapping DisplayPort and HDMI and moving the monitors to different outputs. the primary screen stays perfect. can a driver really do this to just one screen? the flicker is subtle enough that i sometimes doubt myself, then it happens three times in a row and i want to throw teh monitor across the room. any ideas on what to test first?

    32
  2. hmmm is G-Sync/FreeSync/Adaptive Sync enabled on either monitor?

    6 0 helpful
  3. ahh classic if none of that helps, roll back to the previous driver to confirm xD if teh flicker disappears, report it with your exact setup to teh Gigabyte feedback channel and stay on the older driver for now. good luck man!

    2 1 helpful
  4. ok so same issue here on my old thinkpad... following this thread good luck man!

    7 0 helpful
  5. if the windows jump to teh main screen, the monitor is actually disconnecting. thats link training, which can be cable quality, DisplayPort sleep or teh dock. try a certified cable and disable the monitors own deep sleep/auto input switching.

    the real fix was the friends we made along the way

    2 0 helpful
  6. dude ok update: did what @zanez683 said and its fine now. exact same thing happened to my old thinkpad last month

    1 0 helpful
  7. hmmm +1 same here. make a backup before u touch teh fan curve, learned that the hard way

    1 6 helpful
  8. in Settings > System > Display > Graphics > Change default graphics settings, try toggling Hardware-accelerated GPU scheduling and Variable refresh rate (teh Windows one), then reboot. good luck man!

    1 0 helpful
  9. ehh idk man that sounds like bad advice tbh but hey ymmv

    2 9 helpful
  10. omggg ok update: did what @lambdashed-2xq said and its fine now thank u thank u thank u

    4 6 helpful
  11. turn off vairable refresh (G-Sync/FreeSync/Adaptive Sync) on teh secondary monitor and in teh driver control panel as a test. VRR on a desktop screen with video playing is a classic flicker trigger.

    0 0 helpful
  12. been there man try turning off the default config first, fixed it for me. +1 same here worked for me anyway 🤷

    2 0 helpful
  13. @late_probe what did u end up doing in the end ??

    4 2 helpful
  14. oof if youre on a USB-C dock, update the dock firmware and the Gigabyte driver both from their support pages. docks rely on DisplayPort alt mode and are very sensitive to driver changes. hope that helps :)

    windows update said 'this will only take a moment' 3 hours ago

    thinking

    0 0 helpful
  15. been there man start with refresh rates. Mixed refresh setups are sensitive to driver changes. In Settings > System > Display > Advanced display, set both screens to standard rates first (for example both at 60 Hz) and see if the flicker stops. Then raise them one at a time. hope that helps :)

    10 0 helpful
  16. pro tip: write down what u change... i didnt and had to redo flikcer from scratch. which version are you on?

    0 9 helpful
  17. @ruben_shader dude turned off adaptive sync on the secondary monitor and teh flicker stopped completely. main screen still runs at full refresh. peace at last.

    22 0 helpful

Reply to this topic

Sign in or create an account to reply.