Noor M.
Strategy and sim games, plus the hardware to run them. Interested in rpg, laptops, steam deck.
- Reputation
- 28
- Topics
- 0
- Posts
- 6
- Solutions
- 0
- Joined
- 22 May 2025
oh ive been there lol check the manual for teh recommended RAM slots. On 4 slot boards with two sticks it's alomst always A2 and B2, the second and fourth slots from the CPU. Slots one and two are a common mistake. (mini ITX boards only…
Breadboard test: take teh board out, put it on its box with only CPU, cooler, one RAM stick and the PSU. Short the power pins with a screwdriver. It removes case standoff and front panel issues from the equation. good luck man!
been there man if you added the prinetr through discovery, Windows may have picked a similar models driver. Remove the printer and re add it with the exact model driver from the printer makers support page.
yeahhh pro tip: write down what u change. i didnt and had to redo module from scratch :) @claraj860 did u ever fix it?? worked for me anyway 🤷
if the windows jump to teh main screen, the monitor is actually disconnecting. thats link training, which can be cable quality, DisplayPort sleep or teh dock. try a certified cable and disable the monitors own deep sleep/auto input…
ahh classic if none of that helps, roll back to the previous driver to confirm xD if teh flicker disappears, report it with your exact setup to teh Gigabyte feedback channel and stay on the older driver for now. good luck man!